Introduction

This document is the specification for PE 80 and PE100 electrofusion fittings in the nominal size range up to and including 630 for use with PE80 and PE100 pipe and fittings, with nominal pressure ratings up to and including 16 bar. It supersedes WIS 4-32-06.

This specification has been prepared by WRc plc under the direction of the Water Industry Engineering and Operations committee in consultation with the British Plastics Federation.
Where possible, this specification has been harmonised with the draft CEN standard for plastics piping systems for water supply – Polyethylene (PE) – Part 3 fittings.

The dimensions and pressure ratings of the pipes with which fittings manufactured in accordance with this specification are to be used, are based on BS 5556 and are given in WIS 4-32-03, WIS 4-32-09, WIS 4-32-13, and WIS 4-32-15. WIS 4-32-08 covers site fusion jointing of PE80 and PE100.

The WSA/WRc manual for polyethylene pipe systems for water supply, offers guidance to the UK water industry on the practical design, installation and operation of PE water pipeline systems.

Caveats

This document has not been reviewed for its continued currency since publication.

You should recognise the distinctions between ‘current’ and ‘ageing’ standards to better understand its interpretation.

One or more ‘Common Editorial Caveats’ may apply to this document.

See this site’s webpage ‘WIS & IGN Library / Navigation & Caveats’ for more details.

It is currently only available in a scanned format.